2023 2024 EduVark > Education Discussion > General Discussion


  #1  
June 21st, 2014, 05:15 PM
Super Moderator
 
Join Date: Mar 2013
GATE Agricultural Engineering (AG) question paper

Will you please give me question paper for GATE Agricultural Engineering (AG) examination in PDF file format ?

Here I am giving you question paper for GATE Agricultural Engineering (AG) examination in PDF file attached with it so you can get it easily..

Q.7 The rear furrow wheel in a tractor mounted disc plough is provided to
(A) reduce the frictional power loss
(B) maintain the uniform depth of cut
(C) reduce the side draft
(D) improve the penetration of the plough

Q.8 The cumulative discharge of a tractor mounted hydraulic sprayer having 7 nozzles is 2.0 L min1
when the tractor is operated at 4 km h1. If the nozzle spacing is 0.3 m, the discharge in L ha1 is
(A) 1000.02 (B) 285.72 (C) 166.67 (D) 142.86

Q.9 A two-wheel drive tractor, while negotiating a terrain, indicates 100% slip of one of the rear
wheels. Under such a condition, the use of differential lock causes
(A) equal speed and equal power distribution to both the drive wheels
(B) equal speed and equal torque distribution to both the drive wheels
(C) equal power and equal torque distribution to both the drive wheels
(D) equal speed and unequal power distribution to both the drive wheels

Q.10 A double acting hydraulic cylinder has a rod diameter equal to one-half the piston diameter. If the
system pressure is maintained constant, the ratio of load carrying capacity of extension stroke to
that of retraction stroke is
(A) 0.75 (B) 1.00 (C) 1.33 (D) 4.00

Q.11 During a test, sound level was measured as 90 dB in the operator’s cabin on a tractor. Taking
reference sound pressure as 5 2 10  N m-2, the measured RMS sound pressure in N m2 is
(A) 6.32 (B) 1 6.32 10  (C) 3 1.8 10  (D) 10 6.32 10 

Q.12 During land leveling of agricultural land for irrigation and drainage purposes, the acceptable
deviation in elevation from the design value in metre is
(A) 0.015 (B) 0.025 (C) 0.055 (D) 0.150

Q.13 The gridiron pipe drainage system is more economical than the herringbone pipe drainage system
because
(A) it is adopted in the fields which do not require complete drainage
(B) the number of main or sub-main lines is reduced
(C) the number of junctions and the double-drained area are reduced
(D) it has only main or sub-main lines

Q.14 If the drainable porosity of a command area is 5% and the design rate of drop of the water table is
0.25 m day1, the drainage coefficient of the command area in mm day1 will be
(A) 250 (B) 12.5 (C) 1.25 (D) 0.0125

Q.15 A soil has a void ratio of 0.75 and a specific gravity of 2.66. The value of critical hydraulic gradient
at which quick sand condition will occur is
(A) 0.95 (B) 1.05 (C) 2.09 (D) 6.64

Q.16 The pressure that does not have any measurable influence on the void ratio or shearing resistance of
the soil mass is
(A) pore water pressure (B) intergranular pressure
(C) capillary pressure (D) surcharge pressure

Q.17 The Rational method is used to estimate
(A) runoff volume (B) peak runoff rate
(C) runoff depth (D) direct surface runoff




Attached Files
File Type: pdf GATE-Agricultural-Engineering-(AG)-question-paper.pdf (440.1 KB, 57 views)

Last edited by Neelurk; June 26th, 2020 at 11:15 AM.
Similar Threads
Thread
ARS NET Agricultural Biotechnology Question Paper
GATE Agricultural Engineering Question Paper
GATE instrumentation engineering Last years question paper
GATE Exam Computer Science engineering stream previous year question paper
GATE Agricultural Engineering Study Material
Past year question papers of GATE in Engineering of Mechanical Engineering
Past year question papers of GATE in Engineering of Electronics and Communication Engineering
Past year question papers of GATE in Engineering of Civil Engineering
GATE Agricultural Engineering – AG Syllabus
Question Paper GATE Aerospace Engineering AE
GATE Textile Engineering TF Question Paper
Question paper for GATE Mining Engineering
GATE Metallurgical Engineering Solved Question Paper
IFS Agricultural Engineering Paper II Exam Question Papers
GATE Mechanical Engineering 2014 question paper and analysis



Quick Reply
Your Username: Click here to log in

Message:
Options



All times are GMT +5. The time now is 05:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.6.0

1 2 3 4 5 6 7 8