#1
July 13th, 2016, 05:24 PM
| |||
| |||
IIT Bombay TECHFEST Full Throttle
Hii sir, I wants to get the information about the IIT Bombay Tech Fest Event Full Throttle will you please provide me the information about the IIT Bombay Tech Fest Event Full Throttle ? Techfest is the annual science and technology festival of Indian Institute of Technology Bombay. The details of the Full Throttle Event is given below Task: Make a wireless remote controlled machine, powered only by an IC engine, which can race against other opponents on an off-road dirt track with many obstacles. Track Specification : 1) The width of the track will be around 9 feet for most of the part. 2) A control stand will be provided along the track for the driver to position himself to control his vehicle during the run. The height of the stand will be around 8 feet. The controlling of machine has to be done from this stand only. 3) The changes in obstacles, if any, will be duly addressed to you through mail. 4) Despite organizer’s efforts to keep the track’s quality intact, the track is subjected to undergo wear and tear as machines run over it. The machine is expected to be able to perform on such a weakened track as well. 5) Multiple machines will race on a single lane track at a time. 6) A lap of the track is completed when the machine comes back to the start-finish line. Machine Specification: Machine should fit in a box of dimensions 700mm x 500mm x 600mm at any moment of time during the race. The external device which is used to control the machine is not included in the size constraint. The machine should be controlled by a wireless remote control mechanism throughout the race. The machine must not be made from Lego parts, or any ready-made assembly kits other than the parts mentioned below. Readily available chassis layouts are not allowed. Any machine found having a readymade chassis will be disqualified. The machine parts may be roughly classified into structural and functional parts: Functional parts - Gears, differential gear, engine, springs, shock absorbers, servo motors (non propulsion purposes only), batteries, wheels and wheel hub can be directly . Judging for the same will be strict and the participant will be immediately disqualified if any of the above structural components are found to be ready-made. The tires must have a minimum diameter of 3 inch. You are advised to use tires of good width for better performance on dirt tracks Tech Fest Full Throttle Last edited by Neelurk; March 24th, 2020 at 02:24 PM. |
|