As per your concern I will get the KL University Engineering Entrance Exam paper so that you can have idea about the exam.

Here is the exam paper
A block ‘A’ of mass 2 kg rests on another block B of mass 8 kg which rests on a horizontal floor. The coefficient of friction between A and B is 0.2. While that between B and floor is 0.5. When a horizontal force of 25 N is applied on the block B, the force of friction between A and B is
(a) zero
(b) 3.9 N
(c) 5 N
(d) 49 N

Three rods A, B and C of the same length and same cross-sectional area are joined in series. Their thermal conductivities are in the ratio 1 : 2 : 1.5. If the open ends of A and C are at 2000C and 180C respectively, the temperature at the junction of A and B in equilibrium is
(a) 1560C
(b) 740C

(c) 1160C
(d) 1480C

The sky wave propagation is suitable for radio waves of frequency
(a) Upto 2 MHz
(b) from 2 MHz to 20 MHz
(c) from 2 MHz to 30 MHz
(d) above 30 MHz

An – inelastic ball is dropped from a height of 100 m. Due to the earth, 20% of its energy is lost. To what height will the ball rise?
(a) 80 m
(b) 40 m
(c) 60 m
(d) 20 m

The same mass of copper is drawn into two wires 1 mm thick and 2 mm thick. Two wires are then connected in parallel and current is passed. The heat produced in the wires is in the ratio
(a) 16 : 1
(b) 1 : 1
(c) 1 : 16
(d) 1 : 4

A short magnet produces a deflection of 300 when placed at a certain distance in tan A position of magnetometer. If another magnet of double the length and thrice the pole strength is placed at the same distance in tan B position the deflection produced is
(a) 300 (b) 600
(c) 450
(d) 1200




For full information please have a look file

Attached Files

KL University Engineering Entrance Exam paper.pdf (578.7 KB, 61 views)