Please provide me question paper for GATE Electrical Engineering examination in PDF file format ?

Here I am giving you question paper for GATE Electrical Engineering examination in PDF file attached with it so you can get it easily.

Q.10 The slip of an induction motor normally does not depend on
(A) rotor speed (B) synchronous speed
(C) shaft torque (D) core-loss component

Q.13 The bridge method commonly used for finding mutual inductance is
(A) Heaviside Campbell bridge (B) Schering bridge
(C) De Sauty bridge (D) Wien bridge

Q.19 The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit
input B. The number of combinations for which the output is logic 1, is
(A) 4 (B) 6 (C) 8 (D) 10

Q.24 The typical ratio of latching current to holding current in a 20 A thyristor is
(A) 5.0
(B) 2.0
(C) 1.0
(D) 0.5

Q.34 A cylindrical rotor generator delivers 0.5 pu power in the steady-state to an infinite bus through a
transmission line of reactance 0.5 pu. The generator no-load voltage is 1.5 pu and the infinite bus
voltage is 1 pu. The inertia constant of the generator is 5 MW-s/MVA and the generator reactance
is 1 pu. The critical clearing angle, in degrees, for a three-phase dead short circuit fault at the
generator terminal is
(A) 53.5 (B) 60.2 (C) 70.8 (D) 79.6


36 A 220 V, 15 kW, 1000 rpm shunt motor with armature resistance of 0.25 W has a rated line current
of 68 A and a rated field current of 2.2 A. The change in field flux required to obtain a speed of
1600 rpm while drawing a line current of 52.8 A and a field current of 1.8 A is
(A) 18.18 % increase (B) 18.18 % decrease (C) 36.36 % increase (D) 36.36 % decrease
Q.37 A fair coin is tossed till a head appears for the first time. The probability that the number of
required tosses is odd, is
(A) 1/3 (B) 1/2 (C) 2/3 (D) ¾

Attached Files

GATE-EE-paper.pdf (205.0 KB, 154 views)