2023 2024 EduVark > Education Discussion > Question Papers


  #1  
July 11th, 2014, 03:39 PM
Unregistered
Guest User
 
Madhya Pradesh State Electricity Board Junior Engineer modal question papers

Will you please share with me the Madhya Pradesh State Electricity Board Junior Engineer modal question papers?
Similar Threads
Thread
Bihar Electricity Board Junior Engineer Recruitment
Chhattisgarh State Electricity Board Assistant Engineer past year question papers
Transmission Corporation of Andhra Pradesh Limited Junior Accounts Officer modal question papers
Last year question papers of Uttar Pradesh Public Service Commission Junior Engineer Electrical
Madhya Pradesh State Electricity Board Asistant Engineer modal question papers
Last year question papers of class X of Madhya Pradesh Board of Secondary Education of Science
Last year question papers of class X of Madhya Pradesh Board of Secondary Education of Mathematics
Last year question papers of class X of Madhya Pradesh Board of Secondary Education of English
Last year question papers of class X of Madhya Pradesh Board of Secondary Education of Hindi
Railway Recruitment Board Secunderabad last year question papers of Junior Engineer
Railway Recruitment Board Junior Engineer last year question papers
Madhya Pradesh State Electricity Board sample question papers of post of Trainee Executive (Mechanical)
Madhya Pradesh Board Class 10 Science Exam Question Papers
Madhya Pradesh Board Class 10 General English previous years question papers
Previous year question papers of 10th board in Madhya Pradesh in PDF format

  #2  
July 14th, 2014, 08:30 AM
Super Moderator
 
Join Date: Mar 2012
Re: Madhya Pradesh State Electricity Board Junior Engineer modal question papers

As you want to get the Madhya Pradesh State Electricity Board Junior Engineer modal question papers so here it is for you:

The chronological order of strokes in a four stroke petrol engine is:
1] Suction stroke, working stroke, compression stroke and exhaust stroke.
2] Suction stroke, compression stroke, working stroke and exhaust stroke.
3] Compression stroke, working stroke, suction stroke and exhaust stroke.
4] Compression stroke, suction stroke, working stroke and exhaust stroke.

The enthalpy of steam is defined as:
1] Difference of internal energy and product of pressure and volume.
2] Product of internal energy and pressure.
3] Sum of internal energy and product of pressure and volume.
4] Amount of heat change divided by the absolute temperature.

Which of the following operations can be performed using a drilling machine?
A. Reaming B. Countersinking C. Spot Facing D.
Thread tapping
1] Only A, B and D 2] Only B, C and D 3] Only A, B and C 4] All of
these

Which of the following are the advantages of impulse turbine over reaction turbines?
A. Occupies less space per unit power.
B. Compounding is not necessary for speed reduction as the rotor speeds are usually low.
C. Suitable for high power generation.
1] B and C only 2] A only 3] C only 4] A and C only

Maximum power transfer through line V1= 110 kv, V2= 100kv, X=22 ohm is
a 500 MW
b 500 KW
c 250 MW
d 250 KW
Ans: 500 MW

Q.Which type of power plant requires maximum expenditure
a Hydel power plants
b Nuclear power plants
c Thermal power plants
d Gas based power plants

Q.Base load of a power station stands for
a 2-4 hours/day
b 4-8 hours/day
c 8-12 hours/day
d 12-24hours/day
Ans: 12-24hours/day

Q.A wire is placed on the top of a transmission line to protect from
a surge high voltage
b Direct lightning strocks
c indirect lightnin strocks
d Switching over voltages
Ans: Direct lightning strocks

Q.A wire is placed on the top of a transmission line acts as
a acts as a phase wire
b acts as neutral
c acts as a transmission wire
d acts as ground wire

Which of the following can be magnified by magnetic amplifier
(a) voltage
(b) current
(c) power
(d) none of above

The inductance is not used in lag network because of
(a) big size
b) time delay and hysteresis losses
(c) high reactance
(d) none of these

Saturation in a stable control system can cause
(a) conditional stability
(b) over damping
(c) low level oscillations
(d) high level oscillations

Excessive noise in control systems can cause
a) reduction in bandwidth
(b) reduction in gain
(c) saturation in amplifying stages
(d) oscillations

The type-0 system has
(a) net pole at the origin
(b) no pole at the origin
(c) simple at one origin
(d) two poles at the origin

In control systems, excessive bandwidth should be avoided because
(a) noise is proportional to bandwidth
(b) it leads to low relative stability
(c) it leads to slow speed of response
(d) none of these

In most systems, an increase in gain leads to
(a) larger damping ratio
(b) smaller damping ratio
(c) constant damping ratio
(d) none of these

A step function is applied to the input of a system and output is of the form y = t, the system is
(a) stable
(b) unstable
(c) not necessarily stable
(d) conditionally stable

The function of the safety resistor in ohm meter is to
(a) limit the current in the coil
(b) increase the voltage drop across the coil
(c) increase the current in the coil
(d) protect the battery

Which of the following instruments is free from hysteresis and eddy current losses?
(a) M.l. instrument
(b) electrostatic instrument
(c) electrodynamometer type instrument
(d)all of these

The dielectric loss of a capacitance can be measured by
(a) Wien bridge
(b) Owen bridge
(c) Schering bridge
(d) Maxwell bridge

Reed frequency meter is essentially a
(a) recording system
(b) deflection measuring system
(c) vibration measuring system
(d) oscillatory measuring system

In measurements made using a Q meter, high impedance elements should preferably be connected in
(a) star
(b) delta
(c) series
(d) parallel

A digital voltmeter measures
(a) peak value
(b) peak-to-peak value
(c) rms value
(d) average value


Quick Reply
Your Username: Click here to log in

Message:
Options



All times are GMT +5. The time now is 06:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.6.0

1 2 3 4 5 6 7 8