Will you please give me question paper for MHT CET Engineering Examination in a PDF file format ?

Here I am giving you question paper for MHT CET Engineering Examination in a PDF file attached with it so you can get it easily.

The surface tension of a liquid is 1 5 Nm . − If a thin film is formed on a loop of area
2 0.04 m , then its surface energy will be
(A) 2 5 10 J − × (B) 1 4 10 J − × (C) 1 2 10 J − × (D) 1 3 10 J − ×

According to Prevost’s theory every object
(A) radiates heat at the temperature above room temperature
(B) absorbs heat at the temperature above room temperature
(C) radiates heat at all temperatures
(D) reflects radiant heat at all temperatures

When interference pattern is obtained the distance between the mid point of the 6th dark band
on one side and 4th bright band on the other side of the central bright band is
(A) 2 times the band width (B) 10.5 times the band width
(C) 9.5 times the band width (D) 10 times the band width

6. The internal resistance of lead acid cell is less than the internal resistance of
(A) Daniell cell (B) Leclanche cell (C) dry cell (D) all of these

7. A resistance of 2 _ is connected in parallel to a galvanometer of resistance 48 _. The
fraction of the total current passing through the resistance of 2 _ is
(A) 92% (B) 94% (C) 96% (D) 98%
8. A coil and a bar magnet move in the same direction with same high speed then
(A) high emf is induced across the coil
(B) no emf is induced across the coil
(C) low emf is induced across the coil
(D) magnetic flux linked with the coil changes fast

9. Plate characteristics of a triode valve are the curves obtained on plotting a graph between
(A) plate voltage and plate current at constant grid voltage
(B) grid voltage and plate current at constant plate voltage
(C) grid voltage and plate voltage at constant plate current
(D) filament current and plate current at constant plate voltage

10. To use a transistor as an amplifier
(A) emitter−base junction is forward biased and collector−base junction is reverse biased
(B) both junctions are forward biased
(C) both junctions are reverse biased
(D) it does not matter how the transistor is biased, it always works as an amplifier
h r
O
11. A radioisotope having 1/ 2 t 2.3 = days was received after 9.2 days. It was found that 300 mg
of the isotope was left in the container. The initial amount of the isotope was
(A) 4800 mg (B) 2400 mg (C) 1200 mg (D) 3600 mg

12. Among the third row elements, silicon has the highest
(A) Melting point (B) Electronegativity (C) Electron affinity (D) Electropositivity

13. The pair of molecules having same hybridisation of central atom is
(A) NH3, H2O (B) BF3, CO2 (C) CH4, BF3 (D) C2H2, C2H4
14. The elements A and B have the following electronic configurations A = 1s2 2s2 2p6 3s2 3p6
4s2 and B = 1s2 2s2 2p6 3s2 3p5.
The expected compound formed by the combination of A and B is
(A) AB2 (B) A5B2 (C) A2B5 (D) AB5

15. The solubility product of barium chromate is 2.4 × 10
−10. The maximum concentration of
barium nitrate possible without precipitation in a solution of 6 × 10
−4 M K2CrO4 is
(A) 7 4 10 M − × (B) 10 1.2 10 M − × (C) 4 6 10 M − × (D) 4 3 10 M − ×
16. An acid is 40% dissociated in an aqueous solution. The hydronium ion concentration of its
0.2M solution would be
(A) 0.08 M (B) 0.4 M (C) 0.2 M (D) 0.5 M

17. Which of the following compounds will not give a yellow precipitate with iodine and alkali?
(A) Ethanal (B) Ethanol (C) 1−propanol (D) 2−propanol
18. One of the products of the reaction between concentrated sodium hydroxide and
benzaldehyde is
(A) benzyl alcohol (B) Hydrobenzamide (C) Cinnamic acid (D) Benzophenone

19. On strong heating, ammonium acetate gives
(A) Acetamide (B) Methylcyanide (C) Urea (D) Formamide
20. Identify Y in the following sequence.
2
3 3 Ether H / H O
CH CHO CH MgI X Y + + ___ ____
(A) 3 CH OH (B) 3 2 CH CH OH (C) ( ) 3 2
CH CHOH (D) ( ) 3 3
CH COH

Attached Files

MHT CET Engineering Exam Paper.pdf (216.1 KB, 82 views)