| Re: ONGC Previous Question Papers for EEE
ONGC Conducts Written Test and Interview to Select the Eligible Candidates
Written Exam is Divided into two Sections.
General Awareness
Subject Specialization
The Written Test is of Objective Type and Descriptive Questions and Duration is of 3 Hours to Attempt the Papers.
ONGC Question Paper :
ONGC Question Bank in Computer Science,ONGC practice questions
Multiple Choice Questions
1. A computer derives its basic strength from
(a) speed
(b) accuracy
(c) memory
(d) all of the above (Ans)
(e) None of the above.
2. Modern computers compared to earlier computers are
(a) faster and larger
(b) less reliable
(c) larger and stronger
(d) slower but more reliable
(e) faster and smaller (Ans)
3. The use of computer for business applications is attractive because of its
(a) accuracy
(b) reliability
(c) speed
(d) secret code facility
(e) All of the above (Ans)
4. A computer is capable of performing almost any task, provided that it can be
(a) coded
(b) memorized
(c) analyzed
(d) reduced to a series of logical steps (Ans)
(e) changed top mathematics equation
5. A BIT represents a
(a) decimal digit
(b) octal digit
(c) binary digit (Ans)
(d) hexa decimal digit
6. A computer has very high speed, accuracy and reliability. Its intelligence quotient could be of the order of
(a) 100
(b) 0 (Ans)
(c) 50
(d) 200
(e) 99.99
7. Computer can not do anything without a
(a) chip
(b) memory
(c) output device
(d) program (Ans)
(e) None of the above
8. A computer possesses information
(a) as directed by the operator
(b) automatically (Ans)
(c) at once
(d) gradually and eventually
(e) by truncating
9. Pick up the false statement
(a) computer can manipulate both numeric and non-numeric symbols
(b) computer errors can usually be traced to faulty programs or inaccurate input data
(c) the facts or informational raw materials represented by numeric and non-numeric symbols are called information (Ans)
(d) the space in the primary storage section is divided into four areas: input, working, storage, output and program storage.
(e) Information is the relevant knowledge that results from the processing and arranging of data in an ordered and useful form.
10. Processors of all computers, whether micro, mini or mainframe must have
(a) ALU
(b) primary storage
(c) control Unit
(d) all of the above (Ans)
(e) None of the above.
11. Pick up the correct statement about computers
(a) computers process data with human intervention after the program has been fed
(b) all comparisons are made in the control section
(c) the arithmetic-logic section of the CPU selects, interprets and executes the program steps.
(d) the secondary storage devices are usually connected on line to the CPU but for accepting data from them or returning data to them, human intervention is required
(e) computers have the built-in ability to obey different types of instructions. (Ans)
12. Real time computing is possible because of the following characteristic of computer
(a) storage capability
(b) high speed (Ans)
(c) accuracy
(d) versatility
(e) automatic in execution
13. Pick out the wrong statement about modern computer systems
(a) these are simple and easy to take care of
(b) even beginners, untrained persons can safely handle them (Ans)
(c) they require a highly disciplined approach
(d) it is important to understand the proper overall procedures must be followed
(e) the negligent use of a computer system will almost always introduce time bombs into the system.
14. A collection of eight bits is called:
(a) byte (Ans)
(b) word
(c) record
(d) file
(e) None of the above
15. Choose the incorrect statement about micro computers, mini-computers, etc.
(a) a microcomputer can be placed on a single silicon chip
(b) a minicomputer can have more processing capability than a mainframe model
(c) a microcomputer chip performs the arithmetic-logic and control functions of a microcomputer
(d) ROM chips may be used in micros ;to permanently store program instruction
(e) most micros use rigid disk storage devices rather than floppy disk drives. (Ans)
16. Control Unit of a digital computer is often called the
(a) lock
(b) nerve center (Ans)
(c) ICs
(d) all of the above
(e) None of the above
17. Pick up the correct statement
(a) most mainframes are 48-bit machines
(b) thousands of super computers are currently being built
(c) super-computers are usually designed to process accounting applications
(d) mainframes may have multi-processor components that permit several tasks to be processed at the same instant in time (Ans)
(e) minicomputers can not use high speed buffer storage components and are thus always slower than mainframe models.
18. The following acronym recognizes the fact that "computer errors" can usually be traced to incorrect input data or unreliable programs
(a) IGO (Ans)
(b) FIFO
(c) LIFO
(d) DASD
(e) ROM
19. Group of instructions that directs a computer is called
(a) storage
(b) memory (Ans)
(c) logic
(d) program
(e) None of the above
20. Which of the following does not describe one or more characteristics of a computer?
(a) electronic
(b) external storage
(c) stored program
(d) program modification at execution (Ans)
(e) All of the above are characteristics.
21. Which of the following statements is true?
(a) the smart approach to using computers is to write programs
(b) knowledge of the system development life cycle is not important to operators who use computers without programming
(c) hands-on exposure to the computer is not helpful to those who write programs
(d) personal computer have been an important contributing factor in the movement towards using computers without programming (Ans)
(e) None of the above is true
22. Which can read data and convert them to a form that a computer can use?
(a) logic
(b) storage
(c) control
(d) input device (Ans)
(e) output device
23. Software instruction intended to satisfy a user,s specific processing needs are called
(a) system software
(b) a microcomputer
(c) documentation
(d) applications software (Ans)
(e) All of the above
24. Which kind of hardware is used the most in the input phase of a computer based information system?
(a) keyboard (Ans)
(b) printer
(c) monitor
(d) hard disk
(e) floppy disk
25. Which of the following is not a factor when categorizing a computer
(a) amount of main memory the CPU can use
(b) capacity of the storage devices
(c) cost of the system
(d) where it was purchased (Ans)
(e) speed of the output device
26. Which of the following is the most powerful type of computer?
(a) super micro
(b) super conductor
(c) microcomputer
(d) super computer (Ans)
(e) megaframe
27. Which of the following people probably has the least amount of technical knowledge ?
(a) programmer
(b) user (Ans)
(c) system analyst
(d) computer operator
(e) computer professional
28. Which kind of storage device cab be carried around?
(a) floppy disk (Ans)
(b) hard disk
(c) system cabinet
(d) hard disk drive
(e) floppy disk drive
29. Which of the following terms applies to communication between separate computer systems?
(a) computer literacy
(b) power supply
(c) applications software
(d) connectivity (Ans)
(e) None of the above
30. The Central Processing Unit (CPU) consists of:
(a) input, output and processing
(b) control unit, primary storage & secondary storage
(c) control unit, arithmetic-logic unit, primary storage (Ans)
(d) control unit, processing, primary storage
(e) None of the above
The bridge used for measurement of inductance is
A. Wheatstone Bridge
B. Kelvin Double Bridge
C. Anderson Bridge
D. Schering Bridge
Answer: (C)
A three and half digit voltmeter could measure a maximum voltage of
A. 100 Volts
B. 1000 Volts
C. 2000 Volts
D. 10,000 Volts
Answer: (B)
The type of transmission used for television in India is
A. DAB SC
B. SSB
C. VSB
D. SSB-SC
Answer: (C)
The octal number system has
A. Two Different Digits
B. Seven Different Digits
C. Eight Different Digits
D. Ten Different Digits
Answer: (B)
The longitudinal stress in a thin cylindrical shell is
A. Pd/4t
B. Pd/2t
C. Pt/4d
D. Pt/2d
Answer: (A)
: A fixed beam of span L carries a central point load W. The maximum sagging bending moment in the beam is
A. WL/2
B. WL/4
C. WL/8
D. WL/16
Answer: (B)
For bars in tension a standard hook has an anchorage value equivalent to a strength length of
A. 8
B. 12
C. 16
D. 24
Answer: (C)
One of the following methods is adopted for governing of steam turbines in a power plant
A. hit and miss governing
B. blow off in boiler
C. throttle governing
D. speed control
Answer: (C)
A refigerant used in the domestic refrigerator is
A. Sulphur dioxide
B. Air
C. methane
D. Freon
Answer: (D)
Which of the following operations cannot be performed on a lathe
A. facing
B. drilling
C. thread cutting
D. slotting
Answer: (D)
| 
