Can you provide me the syllabus of the subject of Theory of Machines subject of ME (Master of Engineering) Semester - 3rd in PTU or Punjab Technical University? Is it available on the official site too? What is the process to download it?

As you Asking for the Syllabus of the Theory of Machine I Subject of the B.tech Mechancial Engineering Course of the Punjab Technical University the Syllabus is given below

Theory of Machine I

1. Basic Concept of machines:link mechanism kinematic pair and chain, principles
of inversion, inversion of a four bar chain, slider-crank-chain, double slider-crankchain and their inversions, kinematic pairs, Graphical (relative velocity vector and
instantaneous center methods) and Analytical methods for finding: Displacement,
velocity, and acceleration of mechanisms (includingCorliolis components).

2. Lower Pairs:Universal joint, calculation of maximum torque, steering
mechanisms including Ackerman and Davis approximatesteering mechanism,
engine indicator, Pentograph, Straight line mechanisms

3. Belts, Ropes and Chains: Material, types of drives, idle pulley, intermediate or
counter shaft pulley, angle and right angle drive, quarter turn drive, velocity ratio,
crowning shaft pulley, loose and fast pulley, stepped or cone pulleys, ratio of tension
on tight and slack sided of belts, HP transmitted by belts including consideration of
creep and slip, centrifugal tensions and its effecton HP transmitted. Use of gravity,
idle, flat, V-belts and rope materials. Length of belt, rope and chain drives, type and
cone type.

4. Cams:Types of cams and follower, definitions of terms connected with cams,
displacement velocity and acceleration diagrams forcam followers. Analytical and
Graphical design of cam profiles with various motions (SHM, uniform acceleration
and retardation, cycloidal). Analysis of follower motion for circular convex, tangent
cam profiles. Calculation of pressure angle.

5. Friction Devices: Concepts of frictions and wear related to bearingand clutches.
Types of brakes, principle of function of brakes ofvarious types. Braking of front
and rear tyres of a vehicle, Problems to determine braking capacity, Types of
dynamometers,(absorption, transmission).

6. Flywheels:Turning moment and crank effort diagrams for reciprocating machines
Fluctuations of speed, coefficient of fluctuation of speed and energy, Determination
of flywheel mass and dimensions for engines and Punching Machines

7. Governors : Function, types and characteristics of governors,Watt, Porter and
Proell governor. Hartnell and Willson-Hartnell, spring loaded governors. Simple
numerical problems on these governors. Sensitivity,stability, isochronisms and
hunting of governors. Governor effort and power controlling force curve, effect of
sleeve friction.

For more details you may Contact to the Punjab Technical University the contact details Are given below

Contact detals :
Punjab Technical University
Address: Jalandhar-Kapurthala Highway, Near Pushpa Gujral Science City, Ibban, Kapurthala, Punjab 144603
Phone: 0182 266 2549