As you want syllabus of 4th Year of B.Tech Civil Engineering Course of UPTU University, so here I am providing following syllabus:

UPTU University B.Tech Civil Engineering 4th Year Syllabus

NCE-701 Design of Steel Structures

Unit ‐ 1
General Considerations
Introduction, Advantages of Steel as a Structural. Material, Disadvantages of Steel as a Structural Material, Structural Steel, Stress‐Strain Curve for Mild Steel, Rolled Steel Sections, Convention for Member Axes, Loads, Dead Load, Live Loads, Environmental Loads, Seismic Forces, Snow and Rain Loads, Erection Loads, Basis for Design, Design Philosophies, Local Buckling of Plate Elements.
Introduction to Limit State Design
Introduction, Limit States for Steel Design, Limit States of Strength, Limit States of Serviceability, Actions (Loads), Probabilistic Basis for Design, Design Criteria

Unit ‐2
Simple Connections‐–Riveted, Bolted and Pinned Connections
Introduction, Riveted Connections, Patterns of Riveted Joints, Bolted Connections, Types of Bolts, Types of Bolted Joints, Load Transfer Mechanism, Failure of Bolted Joints, Specification for Bolted Joints, Bearing‐Type Connections, Prying Action, Tensile Strength of Plate, Efficiency of the Joint, Combined Shear and Tension, Slip‐Critical Connections, Combined Shear and Tension for Slip‐Critical Connections, Working Load Design, Design of eccentric bolted connections .

Simple Welded Connections
Introduction, Types, Symbols, Welding Process, Weld Defects, Inspection of Welds, Assumptions in the Analysis of Welded Joints, Design of Groove Welds, Design of Fillet Welds, Fillet Weld Applied to the Edge of A Plate Or Section, Fillet Weld for Truss Members, Design of Intermittent Fillet Welds, Plug and Slot Welds, Stresses Due To Individual Forces, Combination of Stresses, Failure of Welds, Distortion of Welded Parts, Fillet Weld Vs Butt Weld, Welded Jointed Vs Bolted and Riveted Joints, Design of eccentric welded connections, Working Load Design.

Unit – 3
Tension Members
Introduction, Types of Tension Members, Net Sectional Area, Effective Net Area, Types of Failure, Design Strength of Tension Members, Slenderness Ratio (λ), Displacement, Design of Tension Member, Lug Angles, Splices, Gusset Plate, Working Load Design.

Unit – 4
Compression Members
Introduction, Effective Length, Slenderness Ratio (λ), Types of Sections, Types of Buckling, Classification of Cross Sections, Column Formula, Design Strength, Design of Axially Loaded Compression Members, Built‐Up Columns (Latticed Columns), Lacing, Batten, Compression Member Composed of Two Components Back‐to‐Back, Splices, Design of Column Bases.

Unit – 5
Beams
Introduction, Types of Sections, Behaviour of Beam in Flexure, Section Classification, Lateral Stability of Beams, Lateral‐Torsional Buckling, Bending Strength of Beams, Laterally Supported Beams, Laterally Unsupported Beams, Shear Strength of Beams, Web Buckling, Bearing Strength, Web Crippling, Deflection, Design Procedure of Rolled Beams, Built‐Up Beams (Plated Beams), Purlins, Beam Bearing Plates, Effect of Holes in Beam, Introduction to Plate Girder, Introduction to Gantry Girder.

NCE – 702 WATER RESOURCES ENGINEERING
UNIT – I
Hydrology : Hydrologic Cycle. Water Budget Equation, Hydrologic system, Precipitation : Types, measurements and analysis, error in estimation, missing data, consistency of rainfall records, Intensity during frequency (IDF) and probabilitic maximum Precipitation (PMP) curves.
Evaporation and consumptive use: Process affecting factors, estimation and measurement techniques.
Infiltration : Process affecting factors, measurement and estimation, Infiltration Indices.

UNIT – II
Surface Runoff: Components and factors affecting runoff, methods of estimation of runoff volume and peak runoff, rating curve, Rainfall – runoff relationships Hydrograph analysis: components, factors affecting hydrographs, base flow separation, Direct Runoff Hydrograph, Unit Hydrograph: Theory and assumptions. Derivation of Unit Hydrograph, Synthetic Unit Hydrograph Introduction to computer models for rainfall runoff analysis.
Irrigation: Developments in India, Necessity and types Advantages & disadvantages of irrigation. Functions of water in plant growth, Methods of Irrigation, Water requirement of crops. Irrigation frequency, Irrigation efficiencies, Principal crops and crop season, crop rotation. Canal irrigation: Classes and alignment, Parts of a canal system, Commanded area, curves in channels, channel losses.

UNIT – III
Sediment Transportation: Suspended and Bed load and its estimation
Irrigation channels: Types: lined and unlined, silt theories: Kennedy’s and Lacey’s Design procedure for irrigation channels, Longitudinal cross section, Schedule of area statistics and channel dimensions, use of Garret’s Diagrams in channel design, cross sections of an Irrigation channel, Computer programs for design of channels
Lining of Irrigation Canals: Advantages and types, factors for selection of a particular type, design of lined channels, cross section of lined channels, Economics of canal lining. Water Logging: Definition, effects, causes and anti-water logging measures, Drainage of water logged land, Types of drains open and closed, spacing of closed drains.

UNIT – IV
Regulation and control of canal system: Purpose, Types of canal regulation works and their functional aspects
Irrigation Outlets: Requirements, types, non-modular, semi-module and rigid module, selection criterion River Training: Objective and need, classification of rivers, and river training works, meandering, stages, methods of river training, bank protection, Methods for measurement of discharge.

UNIT – V
Ground Water Hydrology: Zones of underground water, Aquifers and their types, important terms, Determination of discharge through unconfined and confined aquifers with steady flow conditions, Interference among wells, determination of aquifer constants, Well loss and specific capacity, efficiency of a well, types of water wells, bored and open wells, specific yield of a well, Relative merits of well and canal irrigation, type of tube wells, well surrounding and well development, Suitable site selection for a tube well, Types of open wells, Methods of lifting water. Infiltration galleries.

Attached Files

UPTU University B.Tech Civil Engineering 4th Year Syllabus .pdf (1.07 MB, 228 views)