October 7th, 2017 11:36 AM | |
Garima Chauhan | Re: MTE 2-Stage Hi/Lo Pumps MTE Hydraulics Two Stage/Log Splitter Pumps are produced at our office in the USA. The brilliant pumps are made with an overwhelming obligation development using both our 200 and 300 arrangement outfit pump plans. The MTE two phase pumps include an incorporated inner emptying valve that redirects high-volume stream at least weight when high weight stream is required. The pumps are intended to guide couple to gas motors or AC electric engines that swing up to an ostensible speed of 3800 RPM with a most extreme of 4000 RPM. The emptying highlight guarantees that a little, productive engine can be used without trading off the adequacy. • MTE high pressure pump displacements: 1.81 cc to 6.68 cc (0.110 to 0.408 cu.in./rev) • MTE Low pressure pump displacements: 3.14 cc to 16.00 cc (0.192 to 0.976 cu.in./rev) • Nominal working pressures up to 3500 psi, Maximum pressure up to 3800 psi • Nominal speeds up to 3800 RPM, maximum speed up to 4000 RPM Applications • Logsplitters • Trash Compactors • Press Applications MTE Logsplitter (Hi-Lo) Pump Specifications Contact Information: MTE Hydraulics Address 4701 Kishwaukee Street Rockford, IL 61109 USA Contact sales@mtehydraulics.com PH: 815-397-4701 FX: 815-399-5528 |
October 7th, 2017 10:28 AM | |
Unregistered | MTE 2-Stage Hi/Lo Pumps Hi I would like to know about MTE Hydraulics Two Stage / Log Splitter Pumps as well as its application and also the specifications? |