Go Back   2020 2021 EduVark > Education Discussion > General Discussion





  #1  
Old April 22nd, 2015, 01:32 PM
Super Moderator
 
Join Date: Mar 2012
Default PSOC Anna University Question Paper

For preparation of the EEE stream exam of the Anna University I solve Power System Operation and Control (PSOC) question paper of the year 2012. will you please provide solution of the Anna University PSOC question paper 2012 exam .

I am providing you the question paper of Power System Operation and Control of B.Tech EEE 6th Semester of Anna University.

Anna University B.Tech EEE 6th Sem Power System Operation and Control question paper

The duration of the exam is 3 hours.

The maximum marks of exam is 100.

Answer all questions

Part A – 10* 2= 20

Part B – 5* 16= 80

1. What is specific Electric Loading?
2. How materials are classified according to their degree of magnetism?
3. Name any two methods to reduce armature reaction.
4. What is slot loading?
5. Give the relationship between emf per turn and kVA rating in a transformer.
6. What are the factors affecting the choice of flux density of core in a
transformer?
7. How crawling can be prevented by design in an Induction motor?
8. Define dispersion coefficient of an Induction Motor.
9. What is run away speed of Synchronous Machine?
10. Give the need for damper winding in Synchronous Machine.
PART B — (5 × 16 = 80 marks)
11. (a) Discuss about various duties and ratings of Rotating Machines and give
their respective temperature — time curves. (16)
Or
(b) A field coil has a heat dissipating surface of 0.15 m2 and length of mean
turn 1 m. It dissipates loss of 150 W, the emissivity being 34 W/m2_°C.
Estimate the final steady temperature rise of the coil and its time
constant if the cross section of the coil is 100*50 mm2. Specific heat of
copper is 390 J/kg° C. The space factor is 0.56. Copper weighs 8900 kg/m3.
(16)
12. (a) (i) Explain the effects of choice of number of poles in a DC Machine on
(1) Frequency of flux reversal (2) Weight of iron (3) Weight of
copper and (4) Length of commutator. (8)
(ii) A 5 kw, 250 V, 4 pole, 1500 rpm DC Shunt Generator is designed to
have a square pole face. The specific magnetic loading and specific
electric loadings are 0.42 Wb/m2 and 15000 AC/m respectively. Find
the main dimensions of the machine. Assume full load efficiency
= 0.87 and pole arc to pole pitch ratio is 0.66. (8)
Or
(b) (i) Discuss various methods to determine mmf required for teeth of an
Electric Machine. (8)
(ii) Determine the apparent flux density in teeth of a DC machine if the
real flux density in teeth is 2.15 Wb/m2, slot pitch is 28 mm, slot
width is 10 mm, gross core length is 0.35 m, no. of ventilating ducts
is 4 each 10 mm wide. Magnetizing force corresponding to flux
density of 2.15 Wb/m2 is 55000 AT/m and iron stacking factor is 0.9.
(8)
13. (a) (i) Derive the output equation of a three phase transformer. (8)
(ii) The ratio of flux to full load mmf in a 400 kVA, 50 Hz single phase
core type transformer is 2.4*10–6. Calculate the net iron area and
the window area of the transformer if the maximum flux density in
the core is 1.3 Wb/m2, Current density is 2.7 A/mm2 and window
space factor is 0.26. Also calculate the full load mmf. (8)
Or
(b) A 250 kVA, 6600/400V three phase core type transformer has a total loss
of 4800 W at full load. The transformer tank is 1.25 m in height and
1 m × 0.5 m in plan. Design a suitable scheme for tubes if the average
temperature rise is to be limited to 35° C. The diameter of each tube is
50 mm and are spaced 75 mm from each other. The average height of
tubes is 1.05 mm. Specific heat dissipation due to radiation and
convection is respectively 6 and 6.5 W/bm2_°C. Assume that convection is
improved by 35% due to the provision of tubes. (16)
14. (a) Determine the main dimensions, number of radial ventilating ducts,
number of stator slots and turns per phase of a 3.7 kW, three phase,
400 V, 4 Pole, 50 Hz squirrel cage Induction Motor to be started by a
Star-Delta starter. Given that the average flux density in the air
gap = 0.45 Wb/m2; Ampere Conductor per meter of armature periphery =
23000, full load efficiency = 0.85, full load power factor = 0.84 and
kw = 0.955. Take L/ τ = 1.5. (16)
Or
(b) (i) Discuss the factors to be considered in estimating the length of air
gap of an Induction Motor. (8)
(ii) Discuss the step by step procedure to design the rotor of a squirrel
cage Induction Motor. (8)
15. (a) Define Short Circuit Ratio. Explain how it is determined for an
alternator. Also discuss its effects on the performance of alternator. (16)
Or
(b) (i) Derive the output equation of an AC machine. (8)
(ii) Determine the main dimensions of a 100 kVA, 50 Hz, three phase
375 rpm alternator. The average air gap flux density is 0.55 Wb/m2
and ampere conductors per metre is 28000. Given that τ / L must be
between 1 to 5. The maximum permissible peripheral speed is
50 m/sec. The runaway speed is 1.8 times synchronous speed. (8)


Contact-

Anna University
Sardar Patel Road, Guindy, Anna University, Kotturpuram, Chennai, Tamil Nadu 600025

Last edited by Neelurk; April 28th, 2020 at 11:23 AM.
Reply With Quote Quick reply to this message
Similar Threads
Thread Thread Starter Forum Replies Last Post
Anna University Phd Written Test Question Paper Unregistered General Discussion 5 September 8th, 2020 09:13 AM
Anna university TPDE question paper Anuj Bhola General Discussion 1 November 27th, 2019 11:50 AM
TPDE Anna University Question Paper Nitin Sharma General Discussion 1 March 9th, 2017 12:38 PM
IC Engine Anna University Question Paper Nitin Sharma General Discussion 1 February 28th, 2017 10:14 AM
PSOC VTU Question Papers Priyanka Goyal Question Papers 0 June 29th, 2016 04:06 PM
Anna University Question Paper Format Unregistered General Discussion 0 August 21st, 2015 04:53 PM
PQT Anna University Question Paper Unregistered General Discussion 0 July 20th, 2015 12:36 PM
Anna University KOM Question Paper Unregistered General Discussion 0 June 13th, 2015 10:37 AM
Oops Anna University question paper Unregistered General Discussion 0 June 8th, 2015 12:57 PM
RF And Microwave Anna University Question Paper Unregistered General Discussion 0 May 16th, 2015 01:41 PM
CTEP Anna University Question Paper Unregistered General Discussion 0 May 15th, 2015 04:34 PM
Ethics Anna University Question Paper Unregistered Career and Jobs 1 April 17th, 2015 05:13 PM
Anna University Chennai DSP Question Paper Unregistered Career and Jobs 1 April 16th, 2015 10:19 AM
Anna University MCA Question Paper Garima Chauhan General Discussion 0 April 6th, 2015 10:43 AM
Anna University B Arch question paper Harsh Pandit General Discussion 0 July 2nd, 2014 05:44 PM

  #2  
Old February 15th, 2017, 09:52 AM
Unregistered
Guest User
 
Default Re: PSOC Anna University Question Paper

Can you please provide me the question paper of Power System Operation and Control of B.Tech EEE 6th Semester of Anna University?
Reply With Quote Quick reply to this message
Reply


Quick Reply
Your Username: Click here to log in

Message:
Options



All times are GMT +5.5. The time now is 08:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.6.0

1 2 3 4 5 6 7 8