#1
January 18th, 2018, 11:07 AM
| |||
| |||
RRB Allahabad Junior Engineer
Hi buddy here I have come to collect RRB Allahabad Junior Engineer exam sample paper to do preparation for this exam , so will you plz provide me same here ??
|
#2
January 18th, 2018, 11:07 AM
| |||
| |||
Re: RRB Allahabad Junior Engineer As you want here I am looking for RRB Allahabad Junior Engineer exam sample paper, so on your demand I am providing same for you : 1. The fixed rail in a railway track against which the tongue rail fits s known as: (a) wing rail (b) stock rail (c) lead rail (d) point rail Ans:- B 2. The standard length of rail for Broad Gauge track in India is: (a) 19.2 m (b) 25.6 m (c) 11.8 m (d) 12.8 m Ans:- D 3. The thickness of fish plate generally used in Indian Railway is: (a) 16 mm (b) 10 mm (c) 25 mm (d) 20 mm Ans:- D 4. Thermal efficiency of a diesel engine may be expected to be in the range of: (a) 50-65% (b) 25-35% (c) 15-20% (d) 10-15% Ans:- B 5. Wear on top or head of rail occurs due to: (a) Abrasion of rolling wheels (b) Heavy axle load (c) Constant brake application (d) Any or all of the above Ans:- D 6. Any movement of the locomotive in different planes, e.g., vertical, longitudinal, transversal etc., is known as: (a) Oscillating motion (b) Lurching motion (c) Shutting motion (d) Vibration Ans:- A 7. In rainy season the dust in the ballast becomes mud and comes up by suction from below the rail joint. Such joint is called: (a) Wet joint (b) Water joint (c) Pumping joint (d) Blowing joint Ans:- C 8. Accidents can be avoided by adopting: (a) interlocking (b) C.T.C. system (c) pilot guard system (d) A.T.C. system Ans:-A 9. A parabolic curve introduced between straight and a circular curve or between two branches of a compound curve for ease, comfort and safety of movement of trains on curve is called: (a) Spur curve (b) Transition curve (c) Summit curve (d) Valley curve Ans : B 10. The staggered rails joints are usually provided on: (a) Bridge (b) Curves (c) Branching (d) Tangents Ans : B 11. The track capacity can be increased by: (a) Faster movement of trains on the track (b) By using more powerful engines (c) All the above (d) None of the above Ans : C 12. The railway station at which a track line meets a main line is called: (a) terminal station (b) flag station (c) way side station (d) junction station Ans : D 13. The limiting value of super elevation of board gauge in Indian Railways is: (a) 16.50 cm (b) 30 cm (c) 15 cm (d) 10 cm Ans : A 14. The chart used for recording the condition of track is known as: (a) Rolling chart (b) Track chart (c) Hallade chart (d) Vibro chart Ans: C 15. The most common system of signaling in India is the ...... system. (a) automatic block (b) section clear system (c) absolute block (d) pilot guard system Ans : C 16. The feeder gauge .... is commonly used for feeding raw materials to big Government manufacturing concerns as well as to private factories such as steel plants, oil refineries, sugar factories etc. (a) 0.6096 m (b) 0.792 m (c) 1m (d) 1.676 m Ans : A 17. Which one of the following bolts is not used in rail track: (a) Fang bolt (b) Eye bolt (c) Rag bolt (d) Fish bolt Ans : B 18. The gradient which requires one or more additional locomotive for hauling the load over the gradient is called: (a) Up-gradient (b) Pusher gradient (c) Steep gradient (d) Momentum gradient Ans : B 19. Points and crossings are provided for change of ....on permanent ways. (a) gauge (b) direction and gradient (c) direction (d) gradient Ans : C 20. In locomotive ‘hunting’ is: (a) Movement of locomotive in vertical plane perpendicular to its movement along the track (b) Sinuous path taken by engine as against the alignment of the track (c) Motion after brakes have been applied (d) Combination of A and B above Ans : D 21. The rails which get battered due to action of wheels over the end of the rails are called: (a) Hogged rails (b) Roaring rails (c) Creep rails (d) Bucking rails Ans : A 22. In broad gauge, the clear horizontal distance between the inner faces of two parallel rails forming the track is: (a) 1 m (b) 1.676 m (c) 0.6096 m (d) 0.792 m Ans : B 23. As per Indian standard, the recommended width of ballast section at foot level of rails for broad gauge tracks should be: (a) 4.38 m (b) 3.35 m (c) 1.83 m (d) 2.25 m Ans : B 24. The minimum length of a passenger platform for broad gauge railway should not be less than: (a) 305 m (b) 183 m (c) 495 m (d) 250 m Ans : A 25. Generally the shape of fish plate is: (a) elliptical (b) bone shaped (c) circular (d) rectangular Ans : B 26. For wooden sleepers, size of the ballast should be: (a) 2.54 cm (b) 10.16 cm (c) 3.8 cm (d) 5.1 cm Ans : C 27. The length of track under the control of a Ganger is: (a) 10 to 15 Km (b) 5 to 6 KM (c) 3 to 5 KM (d) 1 to 2 KM Ans : B 28. The maximum rising gradient which is provided keeping the power of locomotive in view, is called (a) Momentum gradient (b) Pusher gradient (c) Down gradient (d) Ruling gradient Ans : D 29. The latest system of signaling introduced is: (a) C.T.C. system (b) pilot guard system (c) section clear system (d) automatic block system Ans : A 30. Detonating signals are used: (a) for noisy engines (b) during foggy and cloudy weather (c) for deaf drivers (d) not now, were in use in nineteenth century only Ans : B |
|