#1
June 27th, 2014, 04:52 PM
| |||
| |||
SSC Junior Engineer Civil Question Papers
Please provide me question paper for SSC Junior Engineer Civil examination in PDF file format ? Here I am giving you question paper for SSC Junior Engineer Civil examination in PDF file attached with it . 1. Timber can be made reasonably fireresistant by a. soaking it in Ammonium Sulphate b. coating with Tar paint c. pumping creosote oil into timber under high pressure d. seasoning process 2. Which one of the following statements is the correct description of the structure of fibre board ? a. Thin slices of superior quality of wood are glued and pressed on the surface of inferior wood b. Streamed mass of wood dusts, wood wool and other vegetable fibres are pressed hard to a thickness varying from 3 mm to 12 mm c. Thin and narrow wood shavings are soaked in a refractory binder material and pressed hard d. Thin and narrow wood shaving are soaked in a refractory binder material and pressed hard 3. Match List I(Constituents of bricks) with List II(corresponding influence) and select the correct answer : List I A. Alumina B. Silica C. Magnesia D. Limestone List II 1. Colour of brick 2. Plasticity recovery for moulding 3. Reacts with silica during burning and causes particles to unite together and development of strength 4. Preserve the for on brick at high temperature and prevents shrinkage 4. In some brick masonry walls, patches of whitish crystals were found on the exposed surfaces, also chipping and spalling of bricks took place from the same walls. Which among the following are the causes of these defects ? 1. Settlement of foundation 2. Over-loading of the walls 3. Sulphate attach 4. Efflorescence a. 1 and 2 b. 2 and 3 c. 2 and 4 d. 3 and 4 5. Match List I with list II and select the correct answer : List I(Property) A. Specific heat of an aggregate B. Thermal conductivity of an aggregate C. Thermal expansion D. Durability of concrete List II(Characteristic) 1. Breaks the bond between the aggregate and the paste 2. Is a measure of its heat capacity 3. Is affected by differences n thermal expansion of two different materials 4. Is a measure of its ability to conduct heat SSC Junior Engineer Civil Question Papers Last edited by Neelurk; February 28th, 2020 at 10:39 AM. |
|