#1
February 20th, 2016, 11:06 AM
| |||
| |||
IIT Madras BET Analysis
Hello sir, I am Prashant. I am form Chennai. I want you to help me by providing me some information regarding the technical specifications of IIT Madras BET surface area Analyser. Indian Institute of Technology, Madras is a type of public engineering institution. It was established in the year 1959. It is located in Chennai, Tamil Nadu, India. It is an institute of National Importance. As you have asked about the technical specifications of BET surface area Analyser of IIT Madras, check below for the information Main features Specific surface area: Minimum surface area of 0.01 m2/g or better with the standard nitrogen system. Any other option to measure surface area to a much lower value must be mentioned. Requirements on the purity of nitrogen for satisfactory operation of the equipment must be mentioned. Gas volume range: 1 x 10-3 cc ->1 x 10^2 cc or better Reproducibility: 0.5% or better Operating environment:20-80% RH, 15 –30°C or better Pore diameter range:4 –300 nm or better Vacuum system: The vacuum system should be capable of degassing the samples upto a vacuum level of 1 x 10^-3 Torr or better. A separate vacuum pump for degassing and for analysis so that the vacuum pump system measnt for degassing is not shared by analysis manifold is preferred. Minimum of three ports that can operate simultaneously and independent of each other. Analysis system along with appropriate high sensitivity pressure transducers should be provided. Possibility of taking video clips, Ethernet communication between computer and the equipment, barcode reader capability and ability to operate/perform diagnostics remotely through internet. Sample preparation devices if any may be separately quoted Last edited by Neelurk; April 4th, 2020 at 04:21 PM. |
|