#1
September 3rd, 2016, 03:03 PM
| |||
| |||
Can you please give here Sample question paper with answer for TANCET exam for Electrical and Electronics Engineering (EEE) students ? As you requires I am here giving you Sample question paper with answer for TANCET exam for Electrical and Electronics Engineering (EEE) students. TANCET Exam EEE Students Paper : The p.u. parameters for a 500 MVA machine on its own base are. inertia M=20 p.u.; reactance X=2 p.u. The p.u. values of inertia and reactance on 100 MVA common base, respectively, are 1) 4, 0.4 2) 100, 10 3) 4, 10 4) 100, 0.4 An 800 kV transmission line has a maximum power transfer capacity operated at 400 kV with the series reactance unchanged, the new maximum power t rans fer capaci ty is approximately. Which three-phase connection can be used in a transformer to introduce a phase difference of 30o between its output and corresponding input lines voltages? 1) Star-Star 2) Star–Delta 3) Delta-Delta 4) Delta-Zigzag The positive, negative and zero sequence impedances of a solidly grounded system under steady state condition always follow the relation 1) z1>z2>z0 2) z1<z 3) z0<z1>z2 4) None of the above The relay operating coil is supplied through 1) Fuse 2) Power transformers 3) Instrument transformers 4) None of the above Minimum sampling rate when spectral range of a function extends from 10 MHz to 10.2 MHz is 1) 0.2 MHz 2) 0.4 MHz 3) 0.6 MHz 4) 0.8 MHz TRIAC is 1) a bidirectional thyristor 2) a combination of 2 PNPN diodes 3) another name for high power thyristor 4) a power BJT An SCR can withstand a maximum temperature of 120oC with an ambient temperature of 75oC. If this SCR has thermal resistance from junction to ambient as 1.5oC/W, the maximum internal power dissipation allowed is 1) 90 W 2) 60 W 3) 30 W 4) 100 W A microprocessor data bus has 16 lines and its address bus contains 12 lines. The number of bytes in the memory will be 1) 2K 2) 4K 3) 8K 4) 16K The address field of a frame in HDLC protocol contains the address of the ––––– station. 1) secondary 2) primary 3) tertiary 4) repeater The –––––– layer decides the location of synchronisation points. 1) network 2) transport 3) presentation 4) session When the gain margin of the system is close to unity and the phase margin is close to zero, then the system is 1) highly stable 2) oscillatory 3) relatively stable 4) unstable The Q output of a JK flip flop is ‘I’. The output does not change when the clock pulse is appl ied. The inputs J and K wi ll be respectively (where ‘x’ - don’t care state) 1) 0 and x 2) x and 0 3) 1 and 0 4) 0 and 1 Which one of the following will give the sum of full-adder as output? 1) Three input majority circuit 2) Three bit parity checker 3) Three bit comparator 4) Three bit counter The frequency response of Chebyshev Type-I IIR filter has 1) a monotonic passband and stopband 2) a monotonic passband and ripples in the stopband 3) ripples in both passband and stopband 4) ripples in the passband and a monotonic Stopband TANCET Exam EEE Students Paper with answer Last edited by Anuj Bhola; October 14th, 2019 at 02:16 PM. |
|