Here I am giving you question paper for Indian engineering service exam Civil service engineering subject in a PDF file attached with it .

What is the ratio of the elastic modulus of
structural timber in longitudinal direction to
that in the transverse direction ?
(a) 11'2 to 1
(b) 1/10 to 1/20
(c) 1 to 2
(d) 10 to20

What is the modulus of elasticity of standard
timber (Group B) in (MN/cm2) ?
(a) 0.5 to 1.0
(b) 1.0 to 1.25
(c) 1.25to1.5
(d) 1-5 to 1-75

What is the treatment for making timber fire- resistant ?
(a) ASCU treatment
(b) Abet's process
(c) Creosoting
(d) Tarring

How is the process of treatment of wood
using a preservative solution and forcing air
in at a pressure designated ?
(a) Ruping process
(b) Lawri process
(c) Full cell process
(d) Empty cell process

Modular bricks are of nominal size
20x 10% 10 cm and 20% of the volume is lost
in mortar between joints. Then what is the
number of modular bricks required per cubic
meter of brickwork ?
(a) 520
(b) 500
(c) 485
(d) 470

6. In order to achieve a safe compressive
strength of 20 kg/crn2 in a brick masonry,
what should be the suitable range of
crushing strength of bricks ?
(a) 35 kg/cm2 to 70 kg/cm2
(b) 70 kg/cm2 to 105 kg/cm2
(c) 1 05 kg/cm2 to 125 kg/cm2
(d) More than 125 kg/cm2

What is the requirement of water (expressed
as % of cement w/w) for the completion of
chemical reactions in the process of
hydration of OPC ?
(a) 10to 15%
(b) 15 to 20%
(c) 20 to 25%
(d) 25 to 30%

8. Which factors comprise maturity of
concrete ?
(a) Compressive strength and flexural
strength of concrete
!(b) Cement content per cubic metre and
compressive strength of concrete
(c) Curing age and curing temperature of
concrete
(d) Age and aggregate content per cubic
metre of concrete

9. What is the minimum value of individual
test results (in N/mm2) for compressive
strength compliance requirement for
concrete M20 as per coda1 provision ?
(a) fck -
(b) fc, - 3
(4 f& - 4
(4 fc, - 5

Attached Files

IES Civil Engineering Papers.pdf (489.3 KB, 127 views)